2pcs SHITBOX EDITION Emblem Decal Badge Stickers for GM GMC Chevy Car Truck 3D

Description

Features:
*100% brand 3D new and good quality
*100% weather-proof.
*Self adhesive, peel and stick,easy to put on your vehicle.
*Perfect decoration and protection for your vehicle.
*Please use detergent or alcohol to clean the surface of the target and keep clean and dry.
Comes with adhesive on the back, just peel and stick it on your vehicle.
Please stick in the flat，Not an arc place,
Package Include:2pcs
Important
Vehicle Emblem and Badge Installation Instructions
Step 1
2pcs SHITBOX EDITION Emblem Decal Badge Stickers for GM GMC Chevy Car Truck 3D
Features:
*100% brand 3D new and good quality
*100% weather-proof.
*Self adhesive, peel and stick,easy to put on your vehicle.
*Perfect decoration and protection for your vehicle.
*Please use detergent or alcohol to clean the surface of the target and keep clean and dry.
Comes with adhesive on the back, just peel and stick it on your vehicle.
Please stick in the flat，Not an arc place,
Package Include:2pcs
Important
Vehicle Emblem and Badge Installation Instructions
Step 1
Removing old emblem or emblems can done neatly by using a heat gun on the lowest setting. Carefully pry the old emblem off using a putty scraper.
Step 2
Then clean the area where the emblem adhesive still remains. Use adhesive cleaner and a clean rag.
Step 3
Most important step is to use rubbing alcohol on a different rag to clean the remaining grease or dirt from the location. Allow it to air dry.
Step 4
Using a level or ruler to create a straight line parallel to the ground, marking the location of the emblem against desired surface or body lines. Use painter’s tape to make your guide lines.
Step 5
Prepare the emblem, making sure it’s clean. Be sure to never touch the application adhesive on the back of the emblem after  Remove the backing tape from the adhesive.
Step 6
Hold the emblem just above the surface in the desired location, using the painter’s tape as a guide to keep the emblem level located properly.
Step 7
Stick the emblem on and hold it in place until the adhesive has had a chance to setup bond on the surface of the vehicle. This usually takes 10 seconds..
Item Specifics
Brand
Unbranded
Manufacturer Part Number
Does Not Apply
Payment
(1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.
(2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.
(3). Before payment,Please keep the consistency of Paypal address and ebay address.
(4). Quantity orders are welcome!
Shipping
(1) All items will be shipped in 24 hours after receiving your payment .
(2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.
Returns
(1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.
(2). All returned items should be in the original packaging , return tracking information should be provided ..
(3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .
Contact Us
(1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.
(2).We maintain high standards of excellenceand
strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately Before you give us neutral
or negative
feedback, so that we can satisfactorily address your concerns.
FAQ
Q1: Will this bulb fit my vehicle?
A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
Q2: My item has not arrived, what’s taking so long?
A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
Q3: Do I need to mention the Year, Make and Model in the notes when place order?
A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
Q4: My bulbs won’t fit, help!
A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
The bulb size may be wrong, double check the item you received with the item you ordered.
Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn’t work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
Q6: WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
– if your light turns on, please proceed to install both bulbs onto your vehicle.
– if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
DESCRIPTION
PAYMENT
SHIPPING
RETURN POLICY
CONTACT US
Store Category
Store Home
Hot
LED Headlight
◈  H7
◈  H8/H9/H11
◈  9003/H4/HB2
◈  9005/HB3
◈  9006/HB4
◈  9007
◈  9008/H13
◈  9012/HIR2
◈  Combo Kits
LED Fog Light
◈  H8/H9/H11/H16JP
◈  H10/9145/9140
◈  H16/5202
◈  9005
◈  9006
◈  880/890/899
◈  881/886
◈  PSX24W/2504
◈  P13W
LED Backup Light
◈  3157/3156/4157/3057
◈  7443/7440/7441/7444
◈  T15/921/W16W
◈  1156/P21W/BA15S/7506
LED Turn Signal Light
◈  3157/3156/4157/T25
◈  1157/BAY15D/7507
◈  1156/BA15S/7506/P21W
◈  7443/7444NA/7440/W21W
◈  7440
LED Brake Light
◈  3157/3156/T25
◈  7443/7440/T20/7444NA
◈  1157/7507/BAY15D
LED Interior Light
LED RGB Light
Center Console Organizer
Other
Hot Item
2pcs SHITBOX EDITION Emblem Decal Badge Stickers for GM GMC Chevy Car Truck 3D
USD 12.99
2x Amber White LED Car Truck Emergency Warning Hazard Flash Strobe Light Bar New
USD 17.99
5 Modes 60″ 3Row 432LED Truck Strip Tailgate Light Bar Reverse Brake Tail Signal
USD 18.99
6X 3157 3156 LED Backup Reverse Brake Turn Signal Light Combo White Red Yellow
USD 23.99
2x AUXITO 1156 LED Reverse Light BA15S Backup Bulb 6500K White Parking DRL Lamp
USD 11.69
New List Item
2x Amber White LED Car Truck Emergency Warning Hazard Flash Strobe Light Bar New
USD 16.99
Pair 9005 HB3 LED Headlight Kit Super White 9000LM High Low Beam Fog Light Bulbs
USD 19.99
AUXITO LED License Plate Light Lamp For 2005-2015 Toyota Tacoma 2000-2013 Tundra
USD 15.99
5 Modes 60″ 3Row 432LED Truck Strip Tailgate Light Bar Reverse Brake Tail Signal
USD 17.99
4X SHITBOX EDITION Emblem Decal Badge Stickers for GM GMC Chevy Car Truck Decor
USD 16.99
Picture
2pcs SHITBOX EDITION Emblem Decal Badge Stickers for GM GMC Chevy Car Truck 3D
Features:
*100% brand 3D new and good quality
*100% weather-proof.
*Self adhesive, peel and stick,easy to put on your vehicle.
*Perfect decoration and protection for your vehicle.
*Please use detergent or alcohol to clean the surface of the target and keep clean and dry.
Comes with adhesive on the back, just peel and stick it on your vehicle.
Please stick in the flat，Not an arc place,
Package Include:2pcs
Important
Vehicle Emblem and Badge Installation Instructions
Step 1
Removing old emblem or emblems can done neatly by using a heat gun on the lowest setting. Carefully pry the old emblem off using a putty scraper.
Step 2
Then clean the area where the emblem adhesive still remains. Use adhesive cleaner and a clean rag.
Step 3
Most important step is to use rubbing alcohol on a different rag to clean the remaining grease or dirt from the location. Allow it to air dry.
Step 4
Using a level or ruler to create a straight line parallel to the ground, marking the location of the emblem against desired surface or body lines. Use painter’s tape to make your guide lines.
Step 5
Prepare the emblem, making sure it’s clean. Be sure to never touch the application adhesive on the back of the emblem after  Remove the backing tape from the adhesive.
Step 6
Hold the emblem just above the surface in the desired location, using the painter’s tape as a guide to keep the emblem level located properly.
Step 7
Stick the emblem on and hold it in place until the adhesive has had a chance to setup bond on the surface of the vehicle. This usually takes 10 seconds..
Item Specifics
Brand :
Unbranded
Manufacturer Part Number :
Does Not Apply
Payment
Shipping
Returns
Contact Us
FAQ
(1). We gladly accepts payment via PayPal, We will ship your item(s) within 24 hours.
(2). We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.
(3). Before payment,Please keep the consistency of Paypal address and ebay address.
(4). Quantity orders are welcome!
(1) All items will be shipped in 24 hours after receiving your payment .
(2) We ship this item to US only via USPS first class mail. It usually takes 3-6 working days to deliver.
(1). We offer 30 days return policy. Please contact us within 30 days t from the date you receive your order if you have any issues with the product or want return .Refund will be send after we got your resend package.
(2). All returned items should be in the original packaging , return tracking information should be provided ..
(3). Buyer is responsible for return shipping cost due to the problem not caused by item quality itself .
(1).Negative feedback will not help resolve any problems you have, please contact us via eBay messages before leaving negative feedback, our customer service will make best effort to help you with the issues.
(2).We maintain high standards of excellenceand
strive for 100% customer satisfaction!
Feedback is very important to us. We request that you contact us immediately Before you give us neutral
or negative
feedback, so that we can satisfactorily address your concerns.
Q1: Will this bulb fit my vehicle?
A: We can match almost any vehicle to one of our bulb sizes. eBay only lets us include partial vehicle fitments per listing, but if your vehicle does not show up on the compatibility table at the top of our listings, welcome you to contact us for free consulation before purchasing a product.
Q2: My item has not arrived, what’s taking so long?
A: Sometimes items take longer than expected, especially if it’s going far or to rural area. Check with your post office to see if your item has been held up. Sometimes USPS will not update a tracking number until it has arrived at its destination. If your item still has not arrived after a few days, let us know so we can double check for you and help solve it asap.
Q3: Do I need to mention the Year, Make and Model in the notes when place order?
A: YES. Please include the Year, Make, and Model in the notes section during checkout to ensure you receive everything needed for your kit!
Q4: My bulbs won’t fit, help!
A: Special bulb holder may be required. See if you can take the holder from the stock bulb. If not, let us know.
The bulb size may be wrong, double check the item you received with the item you ordered.
Do you have an aftermarket lighting housing? These may not be perfectly fitted for aftermarket bulbs and will require some manual modifications.
Q5: Neither side lighting up? Both sides flicker, flash, or work inconsistantly.
A:Check the headlight fuses, and then check the ballast plugs to insure correct installation. If this doesn’t work, there may be a voltage problem with the vehicle. You probably just need a relay or capacitor.
Q6: WARNING ABOUT POLARITY
Unlike halogen bulbs, LED are polarity sensitive.
BEFORE you start your LED kit installation, verify the polarity on your vehicle by simply plugging the LED bulb into your vehicle socket.
– if your light turns on, please proceed to install both bulbs onto your vehicle.
– if your light DOES NOT turn on, disconnect the bulb and flip the socket in order to reverse the polarity (this will not damage your vehicle electrical system in any way). Once you made sure the LED bulb turns on, please proceed to install both bulbs onto your vehicle.
Note: There is no convention when it comes to polarity. Different car manufactures have different polarity setup, even within the car model the polarity setup on your low beams and high beams might be different.
All rights reserved.
On Apr-16-21 at 00:20:31 PDT, seller added the following information: